Način vožnje

Driving mode is designed for scenarios such as driving a car or riding a motorcycle, where recording should start and stop automatically based on the vehicle's power status.

When driving mode is enabled, the camera will automatically power on and begin recording as soon as it receives power. Once the power is disconnected, the camera will automatically save the current video and power off—eliminating the need for manual control over power and recording.

To use driving mode with the C400 Pro, the camera unit (C400 Pro Pocket) must be detached from the handheld controller. Driving mode is not supported when the camera unit is attached to the handheld controller.

Preparation:

  1. Detach the C400 Pro camera unit from the handheld controller.
  2. Power on the camera, enter the shooting mode interface, and select "Driving Mode."
  3. Secure the camera in an appropriate position.
  4. Plug the Type-C end of the power cable into the camera unit, and connect the other end to a vehicle power port or a cigarette lighter adapter.

Using Driving Mode

Automatic Power-On and Recording

When the camera unit receives power, it will automatically turn on and begin recording immediately—no manual button presses required.

*If the C400 Pro does not begin recording after powering on automatically, please ensure that a microSD card is inserted into the camera.

Automatic Saving and Power-Off

When the power supply is disconnected, the camera will continue recording for 10 seconds before automatically saving the video and powering off, ensuring that the final segment of footage is captured in its entirety.

*It is recommended to test the power-on/power-off sequence during your first use to confirm that the camera starts, stops, and saves recordings automatically as expected.

Često postavljana pitanja

What is the difference between driving mode and standard recording mode?

      In standard recording mode, you must manually press buttons to start and stop the recording. Driving mode is controlled automatically based on the camera's power status:

      Power on → Camera turns on automatically and begins recording.
      Power off → Camera automatically saves the video and shuts down.

      This is ideal for permanent in-vehicle installation, using a dedicated power cable to connect the camera to the vehicle's USB port or cigarette lighter socket.

      Why does the camera continue recording after the vehicle's engine is turned off?

        It is normal for the camera to continue recording for approximately 10 seconds after detecting a loss of power before automatically saving the footage and shutting down.

        If the camera remains on long after the engine has been turned off, it is likely because your vehicle's USB port or cigarette lighter socket provides "constant power" (i.e., it remains powered even when the vehicle is off). In this case, the camera will only shut down automatically once the power cable is manually unplugged.

        Does driving mode automatically enable loop recording?

          Default setting: By default—or after restoring factory settings—driving mode includes 3-minute loop recording (which automatically overwrites the oldest video files when the storage space is full).

          Manual adjustment: If you wish to change the duration or disable this feature, tap the "Video Settings" icon in the bottom-left corner of the camera's main screen and locate "Loop Recording." You can then adjust the setting as desired (options include 3 minutes, 5 minutes, 10 minutes, or off).

          Jesu li ove informacije bile korisne?

          Online chat

          Razgovarajte s našim timom za podršku

          Započni razgovor
          Tim za podršku SJCAM